Technology news
Loading...

Guide properly for Format USB in Windows 10

If your USB "problematic", the format for it is the best action to the USB return to "normal"

There are 3 ways popular formats, such as NTFS, FAT32 and exFAT. In particular, FAT32 format is already quite old, so the popularity of FAT32 is also increasingly being reduced (especially for storage devices with high capacity); NTFS format that Microsoft is used for the system partition (Windows installation); particularly, exFAT is created to replace FAT32, although not as common as FAT32, but the device supports exFAT more NTFS again.
especially for storage devices with high capacity
Each class has its own advantages and disadvantages, but in terms of popularity most USB storage device that you purchased are available with FAT32 format to ensure high compatibility not only with computers but also on many other devices: a game console, a music player or other device with a USB port.
Each class has its own advantages and disadvantages
While NTFS perfect for drive system, exFAT perfect for external storage devices, then sometimes you are forced to use FAT32 if the device not support.
While NTFS perfect for drive system
The ways to format USB on Windows
In addition to using the software 3rd party support, users can easily reformat your USB drive with some solution "bare hands" on Windows as follows:
Use File Explorer
This is the easiest way and the most widely used today. To do this, you right-click on the USB drive is connected to a computer in File Explorer and select the Format command.
Format dialog box appears, you select the format and rename to USB
Format dialog box appears, you select the format and rename to USB. Then click on Start to begin.
Then click on Start to begin
Warning dialog box appears, press OK to confirm
Warning dialog box appears, press OK to confirm
Reformatting process will take place, depending on the amount of data that you are contained in USB that time of format will go faster or slower. However, you can expedite the process by checking the Quick Format option before pressing Start.
you can expedite the process by checking the Quick Format option before pressing Start
After the reformatting process is completed, a confirmation dialog box will appear. Click OK> Close to close.
a confirmation dialog box will appear. Click OK> Close to close
Using the Command Prompt
Enter the word "cmd" into the search box and right-click to go results Command Prompt and select "Run as Administrator".
Run as Administrator

Command Prompt dialog box appears, enter the command "diskpart" and press ENTER to enable the Diskpart feature of Windows.
Next enter the following command to Diskpart lists the current drive and is connecting to the computer
Next enter the following command to Diskpart lists the current drive and is connecting to the computer.
List disk
Now you enter the command to the Command Prompt with the following syntax
Now you enter the command to the Command Prompt with the following syntax:
Select [the disk order]
As in the picture, we will easily determine the order of the USB drive is connecting to the computer based on the capacity. And in this example is the 1st drive (Disk 1), with a capacity of 14GB. Therefore, the full command of us here would be:
Select disk 1
Then, enter the following command to proceed to delete data to the USB
Then, enter the following command to proceed to delete data to the USB.
Clean
After executing the command above
After executing the command above, USB will be Windows deletes all data and the situation cannot store.
Your next task will be to enter the following command to activate the USB storage
Your next task will be to enter the following command to activate the USB storage. Each command ends with the ENTER key.
Create partition primary
Active
enter the following command syntax to set the format for USB and name
Next, enter the following command syntax to set the format for USB and name.
format fs = [format] label = "Name_USB" quick
In that [format] is the format of the USB, you can choose 1 of 3 format is NTFS, FAT32 or exFAT. And Name_USB is the name of the USB drive. For example, we choose NTFS format and USB name is "Hocz" there will be a complete statement is as follows:
fs = ntfs label format = "Hocz" quick
When the command has finished running
When the command has finished running, you end USB format in the Command Prompt with the following command:
Assign
you end USB format in the Command Prompt with the following command
Is it quite simple?

 

  • What You know about the supper airport ship USS George Washington?

    What You know about the supper airport ship USS George Washington?

    As one of America's legendary battleship, the supper airport ship USS George Washington has speed moving 56 km/h and propulsion uses 2 nuclear reactors

  • ►Microsoft has added the Microsoft Translator which translates handwritings in the photograph

  • ►Google Goals - filling gaps tool for schedules